The pin names of the Fly-Super5Pro H723 in the firmware

Fly-Super5Pro H723 Pinout Diagram

Fly-Super5Pro H723
Fly-Super5Pro H723 Pinout

Fly-Super5Pro H723 Driver Pins in Firmware

Driver pin numbers. They are separated into driver number.

Pin Type 0 1 2 3 4
Enable Pins PB_11 PE_13 PE_9 PC_1 PE_3
Step Pins PE_14 PE_11 PE_7 PE_4 PE_1
Direction Pins PE_15 PE_12 PE_8 PE_5 PE_2
UART Pins PB_10 PE_10 PA_4 PC_0 PE_0

Fly-Super5Pro H723 Other Pins in Firmware

If more than one pin name is availble, either name can be used in the firmware (config.g).
If the pins aren’t in the table (due to not having a special name), then the pin itself can be used in the form of PA0, PA.0, PA_0, A0, A.0 or A_0.

Pin Number Pin Name 1 PWM Hardware Timer
PC_4 ADC0  
PC_5 ADC1  
PB_1 ADC2 Timer 3
PB_7 IO0 Timer 4
PC_7 IO1 Timer 8
PC_6 IO2 Timer 3
PC_13 IO3  
PC_14 IO4  
PC_15 IO5  
PB_2 NEOPIXEL  
PE_6 SERVO0 Timer 15
PC_2 probe  
PD_12 heat0 Timer 4
PD_13 heat1 Timer 4
PB_0 bedout Timer 3
PA_0 fan0 Timer 2
PA_1 fan1 Timer 2
PA_2 fan2 Timer 15
PA_3 fan3 Timer 2
PA_8 BEEP  
PA_13 BTNENC  
PA_15 LCDEN Timer 2
PA_14 LCDRS  
PD_0 LCDD4  
PD_1 LCDD5  
PD_4 LCDD6  
PD_2 LCDD7  
PB_4 LCDMISO Timer 3
PB_3 LCDSCK Timer 3
PD_7 BTNEN2  
PB_6 LCDSS Timer 4
PD_6 BTNEN1  
PB_5 LCDMOSI Timer 3
PD_5 LCDCD  

Configured SPI connections

The below SPI channels are preconfigured in the firmware.
Where NoPin is present, then that pin is not configured by default.

SPI Channel CLK MISO MOSI Hardware or Software Use
0 PA_5 PA_6 PA_7 Hardware Drivers
1 PB_13 PB_14 PB_15 Hardware WiFi
2 PB_3 PB_4 PB_5 Hardware EXP2
3 NoPin NoPin NoPin Software  
4 NoPin NoPin NoPin Software  
5 PD_0 NoPin PA_15 Software Reprapdiscount Display
6 NoPin NoPin NoPin Hardware  
7 NoPin NoPin NoPin Hardware  
8 NoPin NoPin NoPin Hardware  
Tags: