The pin names of the Fly-Super8Pro H723 in the firmware

Fly-Super8Pro H723 Pinout Diagram

Fly-Super8Pro H723
Fly-Super8Pro H723 Pinout

Fly-Super8Pro H723 Driver Pins in Firmware

Driver pin numbers. They are separated into driver number.

Pin Type 0 1 2 3 4 5 6 7
Enable Pins PF_11 PF_14 PG_1 PE_9 PF_2 PC_15 PG_4 PG_7
Step Pins PE_2 PE_3 PE_4 PE_14 PE_15 PE_1 PE_0 PE_6
Direction Pins PC_5 PF_13 PG_0 PE_8 PE_11 PF_0 PG_3 PG_6
UART Pins PC_4 PF_12 PF_15 PE_7 PE_10 PF_1 PG_2 PG_5

Fly-Super8Pro H723 Other Pins in Firmware

If more than one pin name is availble, either name can be used in the firmware (config.g).
If the pins aren’t in the table (due to not having a special name), then the pin itself can be used in the form of PA0, PA.0, PA_0, A0, A.0 or A_0.

Pin Pin Name(s) PWM Timer (up to 3.6) PWM Timer (from 3.7)
PA_0 fan0 Timer 2 Timer 2
PA_1 fan1 Timer 2 Timer 2
PA_2 fan2 Timer 15 Timer 15
PA_3 fan3 Timer 2 Timer 5
PA_4 lcdss    
PA_5 lcdsck Timer 2 Timer 2
PA_6 lcdmiso Timer 13 Timer 13
PA_7 lcdmosi Timer 14 Timer 14
PA_8 io6    
PA_9 tx1    
PA_10 rx1    
PA_15 fan4 Timer 2 Timer 2
PB_0 heat0 Timer 3 Timer 8
PB_1 heat1 Timer 3 Timer 8
PB_2 lcden    
PB_6 btnen2 Timer 4 Timer 4
PB_7 btnen1 Timer 4 Timer 4
PB_10 fan6 Timer 2 Timer 2
PB_11 fan5 Timer 2 Timer 2
PC_0 adc4, out4    
PC_1 adc5, out5    
PC_3 probe    
PC_6 pwmout0, pwm0, servo Timer 3 Timer 8
PC_7 heat2 Timer 8 Timer 8
PC_13 lcdd5    
PC_14 lcdd4    
PD_6 io5    
PD_7 io4    
PD_12 fan7 Timer 4 Timer 4
PD_14 fan8 Timer 4 Timer 4
PD_15 fan9 Timer 4 Timer 4
PE_5 bedout, bed Timer 15 Timer 15
PE_12 beep    
PE_13 btnenc    
PF_3 hvin    
PF_4 adc0, out0    
PF_5 adc1, out1    
PF_6 heat4 Timer 16 Timer 16
PF_7 heat3 Timer 17 Timer 17
PF_8 in7, pwmout1, pwm1 Timer 13 Timer 13
PF_9 adc2, pwmout2, pwm2, out2 Timer 14 Timer 14
PF_10 adc3, out3    
PG_8 lcdrs    
PG_9 io3    
PG_10 io2    
PG_11 io1    
PG_12 io0    
PG_13 lcdd7    
PG_14 lcdd6    
PG_15 lcdcd    

Configured SPI connections

The below SPI channels are preconfigured in the firmware.
Where NoPin is present, then that pin is not configured by default.

SPI Channel CLK MISO MOSI Hardware or Software Use
0 PA_5 PA_6 PA_7 Hardware SBC SPI
1 PB_13 PB_14 PB_15 Hardware WiFi
2 PB_3 PB_4 PB_5 Hardware Drivers
3 PD_3 PD_4 PD_5 Software Accelerometer
4 NoPin NoPin NoPin Software None
5 PC_14 NoPin PB_2 Software Reprapdiscount Display
6 NoPin NoPin NoPin Hardware None
7 NoPin NoPin NoPin Hardware None
8 NoPin NoPin NoPin Hardware None
Tags: