How to configure the Fly-E3-Pro-v3 onboard temperature sensor
Overview
The Fly-E3-Pro-v3 has a temperature sensor on the PCB, near the X and Y stepper motor drivers, that can be used to monitor the board temperature.
Config
Use the following line to activate the temperature sensor.
M308 S2 P"boardtemp" Y"thermistor" A"Board Temperature" T100000 B4092 R2200
The sensor can be added to the temperature graph by selecting extra on the heater control panel in DWC.
The sensor can also be used to trigger a fan etc when a certain threshold is met.