What information is preset for the Fly-ProX10 H723 from 3.5-RC4
With the changes that have been made in 3.5-RC4, below you can find a list of the information preset for the Fly-ProX10 H723.
This page is purely for reference so you can see what is now preset by default.
board=prox10_h723
board.longName="Fly Pro X10 STM32H723"
sdcard.internal.type=2
SPI0.pins={A.5,A.6,A.7}
SPI1.pins={B.13,B.14,B.15}
SPI2.pins={NoPin,NoPin,NoPin}
SPI3.pins={NoPin,NoPin,NoPin}
SPI4.pins={NoPin,NoPin,NoPin}
SPI5.pins={NoPin,NoPin,NoPin}
SPI6.pins={NoPin,NoPin,NoPin}
SPI7.pins={NoPin,NoPin,NoPin}
SPI8.pins={NoPin,NoPin,NoPin}
stepper.powerEnablePin=NoPin
stepper.enablePins={G.10,E.13,G.0,F.13,B.2,C.0,F.4,G.0,C.13,G.15}
stepper.stepPins={E.7,E.8,E.9,E.10,E.11,E.2,E.3,E.4,E.1,E.0}
stepper.directionPins={G.11,E.14,G.1,F.14,F.11,F.10,F.2,C.15,B.7,G.14}
stepper.numSmartDrivers=10
stepper.TmcUartPins={G.12,E.15,E.12,F.15,F.12,F.5,F.1,G.14,B.6,G.13}
stepper.spiChannel=1
power.VInDetectPin=C.2
wifi.espDataReadyPin=D.13
wifi.TfrReadyPin=D.11
wifi.espResetPin=D.10
wifi.serialRxTxPins={D.9, D.8}
wifi.moduleType=esp32
heat.tempSensePins={C.5,C.4,A.4,B.0,C.1}