What information is preset for the BTT Kraken from 3.5-RC4
With the changes that have been made in 3.5-RC4, below you can find a list of the information preset for the BTT Kraken.
This page is purely for reference so you can see what is now preset by default.
board=kraken_h723
board.longName="BTT Kraken V1 STM32H723"
sdcard.internal.type=5
SPI0.pins={NoPin,NoPin,NoPin}
SPI1.pins={B.13,B.14,B.15}
SPI2.pins={C.10,C.11,C.12}
SPI3.pins={C.6,C.7,C.8}
SPI4.pins={NoPin,NoPin,NoPin}
SPI5.pins={D.13,D.15,D.12}
SPI6.pins={E.12,E.13,E.14}
SPI7.pins={NoPin,NoPin,NoPin}
SPI8.pins={NoPin,NoPin,NoPin}
stepper.powerEnablePin=NoPin
stepper.enablePins={E.6,E.3,E.0,B.7,G.13,G.12,B.5,G.14}
stepper.stepPins={C.14,E.5,E.2,B.9,G.9,G.11,B.4,G.15}
stepper.directionPins={C.13,E.4,E.1,B.8,G.10,D.7,B.3,B.6}
stepper.numSmartDrivers=8
stepper.num5160Drivers=8
stepper.spiChannel=3
stepper.TmcUartPins={D.6,D.5,D.4,D.3,D.2,A.15,A.9,A.10}
power.VInDetectPin=NoPin
sbc.TfrReadyPin=G.6
sbc.csPin=E.11
sbc.spiChannel=6
wifi.espDataReadyPin=G.8
wifi.TfrReadyPin=G.7
wifi.espResetPin=G.6
wifi.spiChannel=6
wifi.csPin=E.11
wifi.serialRxTxPins={D.9, D.8}
wifi.serialRxTxPins={B.11,B.10}
wifi.moduleType=esp32
heat.tempSensePins={B.0,B.1,C.5,C.4,A.7}
can.writePin=D.1
can.readPin=D.0
serial.aux.rxTxPins={D.9,D.8}
heat.spiTempSensorChannel=2
heat.spiTempSensorCSPins={C.9,A.8}