Configuring the accelerometer on a Fly-SB2040 Pro Max V3
Overview
The Fly-SB2040 Pro Max V3 has an onboard accelerometer (LIS2DW) which is compatible with RRF.
Accelerometer orientation
Below is the orientation of accelerometer fitted to the Fly-SB2040 Pro Max V3.
Firmware Configuration
Important: The changes shown below that are to be made to config.g assume that the toolboard uses the default CAN address of 124. If you have changed the default CAN address, make sure you change the 124 to the correct address.
See M955 for how to setup and configure the accelerometer, including its orientation in relation to the printer XYZ axis.
An example command would be
M955 P124.0 I10
Duet Forum user Nuramori has produced a graphical guide to help illustrate the orientation options.