The pin names of the Fly-Super8Pro H743 in the firmware

Fly-Super8Pro H743 Pinout Diagram

Fly-Super8Pro H743
Fly-Super8Pro H743 Pinout

Fly-Super8Pro H743 Driver Pins in Firmware

Driver pin numbers. They are separated into driver number.

Pin Type 0 1 2 3 4 5 6 7
Enable Pins PF_11 PF_14 PG_1 PE_9 PF_2 PC_15 PG_4 PG_7
Step Pins PE_2 PE_3 PE_4 PE_14 PE_15 PE_1 PE_0 PE_6
Direction Pins PC_5 PF_13 PG_0 PE_8 PE_11 PF_0 PG_3 PG_6
UART Pins PC_4 PF_12 PF_15 PE_7 PE_10 PF_1 PG_2 PG_5

Fly-Super8Pro H743 Other Pins in Firmware

If more than one pin name is availble, either name can be used in the firmware (config.g).
If the pins aren’t in the table (due to not having a special name), then the pin itself can be used in the form of PA0, PA.0, PA_0, A0, A.0 or A_0.

Pin Number Pin Name 1 Pin Name 2 Pin Name 3 Pin Name 4 PWM Hardware Timer
PA_0 fan0       Timer 2
PA_1 fan1       Timer 2
PA_10 RX1        
PA_15 fan4       Timer 2
PA_2 fan2       Timer 15
PA_3 fan3       Timer 2
PA_4 LCD_SS        
PA_5 LCD_SCK       Timer 5
PA_6 LCD_MISO       Timer 13
PA_7 LCD_MOSI       Timer 14
PA_8 io6        
PA_9 TX1        
PB_0 heat0       Timer 3
PB_1 heat1       Timer 3
PB_10 fan6       Timer 2
PB_11 fan5       Timer 2
PB_2 LCD_EN        
PB_6 BTN_EN2       Timer 4
PB_7 BTN_EN1       Timer 4
PC_0 ADC_4 out4      
PC_1 ADC_5 out5      
PC_13 LCD_D5        
PC_14 LCD_D4        
PC_3 probe        
PC_6 pwm_out0 pwm0 servo out0 Timer 3
PC_7 heat2       Timer 8
PD_12 fan7       Timer 4
PD_14 fan8       Timer 4
PD_15 fan9       Timer 4
PD_6 io5        
PD_7 io4        
PE_12 BEEP        
PE_13 BTN_ENC        
PE_5 bedout bed     Timer 15
PF_3 hvin        
PF_4 ADC_0 out0      
PF_5 ADC_1 out1      
PF_6 heat4       Timer 16
PF_7 heat3       Timer 17
PF_8 in7 pwm_out1 pwm1 out1 Timer 13
PF_9 ADC_2 pwm_out2 pwm2 out2 Timer 14
PF_10 ADC_3 out3      
PG_10 io2        
PG_11 io1        
PG_12 io0        
PG_13 LCD_D7        
PG_14 LCD_D6        
PG_15 LCD_CD        
PG_8 LCD_RS        
PG_9 io3        

Configured SPI connections

The below SPI channels are preconfigured in the firmware.
Where NoPin is present, then that pin is not configured by default.

SPI Channel CLK MISO MOSI Hardware or Software
0 PA_5 PA_6 PA_7 Hardware
1 PB_13 PB_14 PB_15 Hardware
2 PB_3 PB_4 PB_5 Hardware
3 PD_3 PD_4 PD_5 Software
4 NoPin NoPin NoPin Software
5 NoPin NoPin NoPin Software
6 NoPin NoPin NoPin Hardware
7 NoPin NoPin NoPin Hardware
8 NoPin NoPin NoPin Hardware
Tags: