Release notes for the stable release of 3.5.1

Duet3D Release Notes for 3.5.1

Please see the Duet3D release notes for 3.5.1 to see whats new and what has been fixed in this release since 3.4.6.

RepRapFirmware for STM32F4 and STM32H7 Release Notes for 3.5.1 from 3.4.6

  • Duet3d 3.5.1
  • Enable MQTT support (requires ESP firmware >= V2.1b3)
  • STM32F4: Add support for MCP2518FD SP CAN-FD interfaces
  • STM32F4: Improved SPI1 support (allow interrupt operation)
  • Increase open files to 20
  • Ensure ESP32 modules are fully disabled by M552 s-1
  • Removed LPC17xx support from source
  • Updated pins Fly E3 V2
  • Fixed crash when using laser mode
  • Fixed H723 based boards not showing input voltage correctly
  • Fixed display not beeping
  • Adjusted default hardware Neopixel timing to match Duet boards
  • Apply cold extrusion fix
  • Add code to display extended WiFi info from 2.1beta4
  • Add Expansion board to build
  • Improve timeout handling - possibly fix DMA neopixel bug
  • Fly Super5 fixed pin
  • BTT added board “biquskr_3_ez_h723”
  • RP2040 Expansion Added support for MCP251XFD (CAN-FD via SPI)
  • RP2040 Expansion Store reset data in flash
  • RP2040 Expansion Store CAN-FD address in flash
  • RP2040 Expansion Allow firmware update via CAN-FD
  • Added Neopixel support on RP2040 boards
  • Fix bug: SD card not detected on boards using SPI based SD cards
  • Refactored per board configuration
  • Added support for Fly Gemini V3
  • Added support for TMC5160 drivers for RP2040 boards
  • Fixed fail to flash new code in SBC mode
  • Updated version no format to be compatible with DWC
  • Added support for TMC2240 drivers in SPI mode
  • Return actual driver temperature if available (experimental)
  • Allow access to individual driver temperatures (experimental)
  • Add DriverType to board.txt to allow arbitrary driver order
  • STM32H7 allow CAN read/write pins to be changed.
  • STM32H7 allow use of all available pins for SPI5 and SPI6
  • Add new SD Card SPI configuration
  • Add preliminary Kraken and Octopus pro support
  • Change name/version of Stridemax to match release
  • Added preliminary SHT36V3 board
  • Added PITB V2.0 board
  • Made RRF36 i2c pins available
  • Use DMA for SPI1 on SMT32H7 based builds
  • Added SBC support for STM32H723 based boards
  • Added SBC support for STM32H743 based boards
  • Fixed bug when using SBC based board.txt file
  • Added Fysetc Stridemax
  • Updated Kraken signature
  • New configuration system, board pins and default config held in embedded file system
  • Include WiFi and SBC configuration data in board configs
  • Single binary for both SBC and standalone versions
  • Detect type of WiFi module in use and set the WiFi firmware filename based on this
  • Added new boards
  • Improved parsing of board.txt and other config files
  • Fix upgrade of firmware over CAN-FD when mainboard is in expansion mode
Tags: getting_started