General information regarding the BTT Scylla V1
Overview
This page covers any general information for the board, which is supported from 3.5.1.
Board Voltage
The board and all drivers can be powered from 24V to 60V.
Driver Sense Resistor
The first drivers on the use a different sense resistor than is set in the firmware. Please add the following lines to your config.g.
M569.9 P0.0 R0.05 S10
M569.9 P0.1 R0.05 S10
M569.9 P0.2 R0.05 S10
M569.9 P0.3 R0.05 S10
Aux Voltage
The aux outputs are at whatever voltage the input is set at.
Initial Installation
Follow the WiFi instructions or SBC instructions