Hardware changes between each revision of the Fly-Super8
Overview
This page covers the changes made between Super8 hardware revision
Super8 v1.2 to Super8 v1.3
- Just change the onboard wifi to socket mode
Super8 v1.1 to Super8 v1.2
- Adjusted drive level shifting resistors for faster level shifting and better signal quality
Super8 v1.0 to Super8 v1.1
- Modify all drive ports to support 48V voltage
- Modify the drive protection circuit and increase the current quick release resistance to ensure that the AO3400 can be closed and opened quickly enough.
- Modify the accelerometer silkscreen