Printer Guides
There will be different guides written for different printers as time progresses.
- RepRapFirmware for LPC and STM32
- Overview
-
Release Notes
- 3.4.2rc2_102 Release Notes
- 3.4.1_102 Release Notes
- 3.4.1rc1_102 Release Notes
- 3.4.0_1 Release Notes
- 3.4rc2_1 Release Notes
- 3.4rc1_1 Release Notes
- 3.4beta7_2 Release Notes
- 3.4beta6_1 Release Notes
- 3.4beta5_1 Release Notes
- 3.4beta4_1 Release Notes
- 3.4beta3+1_2 Release Notes
- 3.4beta2_2 Release Notes
- 3.3.0_16 Release Notes
- 3.3.0_14 Release Notes
- 3.3.0_11 Release Notes
- 3.3.0_10 Release Notes
- 3.3.0_9 Release Notes
- 3.3.0_8 Release Notes
- 3.3.0_6 Release Notes
- 3.3.0_5 Release Notes
- 3.3_2 Release Notes
- 3.3RC3_2 Release Notes
- 3.3RC2+1_1 Release Notes
- 3.3beta3_2 Release Notes
- 3.3beta1_6 Release Notes
- 3.3beta1_5 Release Notes
- 3.3beta1_3 Release Notes
- 3.2.2_2 Release Notes
- 3.2_7 Release Notes
- 3.2_4 Release Notes
- 3.2_1 Release Notes
- 3.2 RC2 Release notes
-
General
- Custom Commands and G-Code
- Driver Timings
- LPC Board.txt Configurables
- STM32 Board.txt Configurables
- Sensorless Homing and Stall Detection
- MCU Comparrisons
- Adding a Camera
- Configuring Neopixels
- Connecting a Smart Effector
- Configuring a BTT Smart Filament Monitor
- Configuring ExeconMcode
- Short to Ground Errors
- SBC Transfer Ready Pin Timeouts
- Configuring Putty
- Connecting a DHT22 (STM32 Only)
- Useful Macros
- DWC Plugins
- Firmware Build Instructions
- User Created Content
- DSF on Armbian
- LPC Boards
-
STM32F4 Boards
- STM32F4 Firmware Restrictions
- STM32F4 PWM Hardware/Software
- Fly-407ZG
- Fly-CDYv2
- Fly-CDYv3
- Fly-E3
- Fly-E3-Pro
- Fly-E3-Pro-v2
- Fly-E3-Pro-v3
- Fly-Super8
- BTT Octopus v1.1 f429 Version
- BTT Octopus Pro v1.0 f429 Version
- GTR + M5
- SKR Pro v1.1 and v1.2
- SKR v2.0
- SKR-RRF-E3 + IDEX
- Configuring an ESP8266 for STM32F4 Boards
- Configuring an ESP32 for STM32F4 Boards
- Configuring an SBC for STM32F4 Boards
- STM32F4 + Integrated SBC Boards
-
STM32H7 Boards
- STM32H7 Firmware Restrictions
- STM32H7 PWM Hardware/Software
-
Fly-Super8Pro
- Fly-Super8Pro General Information
- Flashing an RRF compatible bootloader
- Connecting via WiFi
- Connecting to a CAN-FD expansion board
- Configuring Sensorless Homing
- Connecting a Serial Screen
- Connecting a 12864 Screen
- Connecting a BLTouch
- Connecting an Accelerometer
- Input Voltage Monitoring
- Connecting a BTT-MOT-EXP
- Pin Names
- SKR3
- Screens
- Adapters
- Printer Specific Guides