Available WiFi Adapters

Overview

There are three main suppliers of WiFi adapters used with the port.
They are detailed below.

TeamGloomy Adapters

PCR/TeamGloomy have been producing adapters for different boards for a long time now.
They can be purchased through tindie.
We produce WiFi adapters that are for the following boards:

  • GTR
  • MKS SGen L v1.0
  • MKS SGen L v2.0
  • SKR v1.3
  • SKR v1.4
  • SKR E3 Turbo
  • SKR Pro

As well as WiFi adapters, we also produce SBC adapters for the following boards:

  • GTR
  • SKR v1.3
  • SKR v1.4
  • SKR Pro

Finally, we also produce adapters to allow the BTT-MOT-EXP to be used on the following boards:

  • SKR v1.3
  • SKR v1.4
  • SKR Pro

Information about each can be found on the relevant board pages.

Fly Adapters

Fly produce a single WiFi module that has a pinout that is compatible with the following boards:

  • Fly-407ZG
  • GTR
  • SKR v1.3
  • SKR v1.4
  • SKR Pro

They can be purchased from AliExpress

There are now two versions of this board. The blue one is the original version and had 2 sets of EXP1 and EXP 1 headers. The new version has a black PCB and passes 8 pins (10 pins including 5v and Gnd) through. This allows use of a 12864 display on an STM32 based board. Below is the pinout.

Fly Wifi Pinout
Fly Wifi Pinout
Fly Wifi Sizes
Fly Wifi Sizes

BTT Adapters

BigTreeTech (BTT) produce a single WiFi module that has a pinout that is compatible with the following boards:

  • Fly-407ZG
  • GTR
  • SKR v1.3
  • SKR v1.4
  • SKR Pro

They can be purchased from AliExpress

Tags: